37South offers an extensive list of Factory Supplied and Certified Accessories that are perfectly mated to our Site Sentinel® and Metermade® products.

We have sourced the most suitable industrial / utility grade sensors that feature ultra-low power consumption, high level of accuracy and ultra fast response times to match our ultra-low powered RTU / Data logger and Metering products.  In addition, we also design and manufacture many accessories such as factory terminated I/O interface cables, junction boxes, pre-built pillar cubicle assemblies etc… to ensure deployment is hassle free and quick for end users.

When users combine our Factory Supplied and Certified Accessories with our Site Sentinel® and Metermade® products, the end result is a perfectly matched turn-key equipment package that works “out-of-the-box” as intended with no guess work required.

2
Yes
None
1
Enter criteria...
/accessories/
Thumbnail

Categories:

Show Accessories by Product Suitability:

101 products«1 of 4»
Antenna / Solar Masts
XMST-002
XMST-002 Image

OH&S Compliant tilt-over Antenna Mast Assembly.

(No Solar Headframe – Used as Antenna Mast Only)

Complete Kit comprised of:

  • Mounting Base
  • Mast Section
  • Antenna Cap
  • Stainless Steel Bolt Kit

Specifications:

  • Aluminium welded construction
  • 4.5 metres finished height above ground level
  • Powder coated “Wilderness Green”
  • Padlockable base section

This is a standard stocked item.

XMST-001
XMST-001 Image

OH&S Compliant tilt-over Solar / Antenna Mast Assembly.

Complete Kit comprised of:

  • Mounting Base
  • Mast Section
  • Solar/Antenna Head-frame
  • Antenna Cap
  • Stainless Steel Bolt Kit

Specifications:

  • Aluminium welded construction
  • 4.5 metres finished height above ground level
  • Powder coated “Wilderness Green”
  • Padlockable base section

This is a standard stocked item.

Antennas
XANT-006
XANT-006 Image

Log Periodic Directional Antenna Kit.

Covers All Cellular Bands from 700 MHz. to 2100 MHz.

Mast mounting hardware is supplied to suite pole diameters of up to 60mm.

Supplied with 10 metres of low loss RG58 cable terminated with SMA male connector.

Nominal Gain:

  • 11.0 dBi 700-1000 MHz
  • 11.0 dBi 1500-3000 MHz

This is a standard stocked item.

XANT-007
XANT-007 Image

Surface Mount “Cats Eye” style pavement reflector with embedded quad band 3G cellular antenna.

Supplied with 3 metre cable length with SMA Male Connector and break-away patch cable to prevent damage.

Nominal Gain:

  • 2.5 dBi 824-960 MHz
  • 1.0 dBi 1710-1880 MHz
  • 0.6 dBi 1850-1990 MHz

This is a standard stocked item.

XANT-005
XANT-005 Image

Test Antenna.

Vertical / Right Angle operation with SMA Male connector.

Designed to be used as a bench testing antenna.

NOTE:

This antenna is not waterproof and should not be installed where an IP68 rated installation is required.

This is a standard stocked item.

XANT-004
XANT-004 Image

External Low-Profile Antenna.

Vandal resistant design, single nut mount with spring washer and integrated o-ring.

Supplied with 1.25m cable length and SMA Male connector.

Nominal Gain:

  • 2.0 dBi 698-960 MHz
  • 3.5 dBi 1710-2170 MHz
  • 5.0 dBi 2300-2700 MHz

This is a standard stocked item.

XANT-003
XANT-003 Image

External Dome Antenna.

Vandal resistant design with foam sealing gasket.  Secured by screws or bolts (not supplied).

Supplied with 1.25m cable length and SMA Male connector.

Nominal Gain:

  • 2 dBi 824-960MHz
  • 2 dBi 1710-2170MHz

This is a standard stocked item.

XANT-001
XANT-001 Image

Internal High Gain Antenna.

Supplied with 1.25m cable length and SMA Male connector.

Designed for use inside the XENC-001 “Premium Pillar Assembly” to provide highest gain possible from internal antenna.

Nominal Gain:

  • 3 dBi 824-896MHz

This is a standard stocked item.

XANT-002
XANT-002 Image

External High Gain Antenna.

Supplied with 10 metre cable length (low-loss cable), factory terminated FME nipple connector and A-88 FME to SMA Male Adaptor.

Single nut mounting (nut supplied).

Designed for use on XMST-001 or XMST-002 Solar / Antenna Mast assemblies.

Nominal Gain:

  • 6.5 dBi 698-960MHz
  • 4.5 dBi 1710-2200MHz
  • 5.5 dBi 2300-2700MHz

This is a standard stocked item.

Batteries
XBAT-004
XBAT-004 Image

Battery Pack – 4 x AA Battery Holder.

Designed for bench testing and programming of Site Sentinel and Metermade devices to prevent flattening non-rechargeable lithium primary battery packs before deployment.

High quality alkaline or lithium non-rechargeable AA batteries are recommended.

Not to be used in conjunction with external solar or DC power supply source.

This is a standard stocked item.

 

XBAT-033
XBAT-033 Image

Site Sentinel® Extended Battery Pack – Non-Rechargeable.

Complete Assembly.

Supplied with three (3) internal XBAT-001 non-rechargeable battery packs, includes 2-pin to 2-pin interconnection cable (0.5m length) and stainless steel mounting bracket.

7.2V nominal voltage, 39 Ah (280.8Wh) total capacity.

Batteries are field replaceable by ordering 3 pieces of XBAT-001.

IP68 Rated Assembly (4 metres / 4 days).

Primary lithium-thionyl chloride (Li-SOCl2), 3 x 2 x D Cell Saft LSH20.

Integral blocking and reverse protection diodes and thermal fuses.

PLEASE NOTE:

The use of non-approved or non-factory supplied battery packs will void product warranty.

All batteries containing lithium must be shipped by road freight.

This is a standard stocked item.

XBAT-001
XBAT-001 Image

Standard Battery Pack – Non-Rechargeable.

Primary lithium-thionyl chloride (Li-SOCl2), 2 x D Cell Saft LSH20.

7.2V nominal voltage, 13 Ah (93.6Wh) total capacity.

Integral blocking and reverse protection diodes and thermal fuse.

PLEASE NOTE:

The use of non-approved or non-factory supplied battery packs will void product warranty.

All batteries containing lithium must be shipped by road freight.

This is a standard stocked item.

XBAT-002
XBAT-002 Image

Standard Battery Pack – Rechargeable.

(for use in Solar or external DC power supply applications).

Panasonic Lithium-Ion cells (4 x AA Cell)

7.4V Nominal Voltage, 6.7Ah (49.58Wh) total capacity.

PLEASE NOTE:

The use of non-approved or non-factory supplied battery packs will void product warranty.

All batteries containing lithium must be shipped by road freight.

This is a standard stocked item.

XBAT-005
XBAT-005 Image

Standard Battery Pack – Non-Rechargeable.

Primary lithium-thionyl chloride (Li-SOCl2), 1 x D Cell Saft LSH20.

3.6V nominal voltage, 13 Ah (46.8Wh) total capacity.

Suits Site Sentinel H1-001-DA Integrated Rain Gauge Product.

PLEASE NOTE:

The use of non-approved or non-factory supplied battery packs will void product warranty.

All batteries containing lithium must be shipped by road freight.

This is a standard stocked item.

 

 

Data Comms Cables
XCAB-800-8.0
XCAB-800-8.0 Image

DC Power and Data Cable for MetPak Weather Station, terminated one end with stripped and tinned wires and loop wires and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger Modbus Comms Port. 8.0 metre length. Designed for separating the MetPak Weather Station from the Site Sentinel (i.e. on a guyed mast, provides 8 metres separation)

This is a standard stocked item.

XCAB-800-0.85
XCAB-800-0.85 Image

DC Power and Data Cable for MetPak Weather Station, terminated one end with stripped and tinned wires and loop wires and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger Modbus Comms Port. 0.85 metre length.

This is a standard stocked item.

XCAB-700-2.0
XCAB-700-2.0 Image

DC Power Cable for ABB Aquamaster 3 Flow Meter (External Renewable Power connection), 2 metre length, terminated one end with ABB specific connector, other end with Site Sentinel® 2-Pin DC connector, used with XIO-202 Plug and Play DC junction box

XCOM-004
XCOM-004 Image

DC Power Cable for ABB Aquamaster 3 Flow Meter (External Renewable Power connection), 2 metre length, terminated one end with ABB specific connector, other end fitted 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger.

XCOM-003
XCOM-003 Image

RS485 Serial Comms cable for ABB Aquamaster 3 Flow Meter (Modbus connection), 3 metre length, terminated one end with ABB specific connector and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger

XCOM-001-0.5
XCOM-001-0.5 Image

Metermade® RS485 Modbus Comms interface card (Suits installation only on Tyco I-300 Irriflow Irrigation Flow meter) with 0.5 metre cable tail

Factory Programming and Build Services
XBLD-001
XBLD-001 Image

Time Poor and don’t want assembly hassle ?

Why not choose piece of mind and  have your equipment package factory built by 37South and shipped ready to deploy in the field.

Site Sentinel® or Metermade® Pillar Cubicle – Factory Build Service (per pillar assembly).

Includes drilling and mounting of your ordered hardware into standard pillar assembly and connection of cables (if ordered) as per standard 37South build templates.

XFPG-001
XFPG-001 Image

Time Poor and don’t want programming hassle ?

Why not choose piece of mind and  have your devices factory programmed by 37South and shipped ready to deploy in the field.

Site Sentinel® or Metermade® device Factory Programming and testing service to Clients SCADA System.

Client to supply site configuration details and connected SIM card.

Field Service Tools
XMAG-001
XMAG-001 Image

Magnetic Swipe / Lanyard.

  • Used to “trigger” unsolicited communications session from battery powered Site Sentinel and Metermade devices.
  • Supplied on handy lanyard.

This is a standard stocked item.

XCAP-003
XCAP-003 Image

Site Sentinel® or Metermade® Battery Powered Logger.

Standard IP68 Blank I/O Connector Cap.

NOTE:

I/O Connector caps MUST be installed on all unused I/O ports where an IP68 rated installation is required.

Supplied in five (5) piece pack.

This is a standard stocked item.

XCAP-002
XCAP-002 Image

Site Sentinel® or Metermade® Battery Powered Logger.

Standard Gold Plated SMA Male IP68 Blank Antenna Connector Cap.

 

Supplied in one (1) piece pack.

This is a standard stocked item.

XCAP-001
XCAP-001 Image

Replacement Blank Antenna Cap.

Suitable for XMST-001 / XMST-002.

Galvanised Steel, Powder coated “Wilderness” Green.

This is a standard stocked item.

XANT-009
XANT-009 Image

Site Sentinel® or Metermade® Battery Powered Logger.

Standard “INTERNAL” right angle antenna with SMA male connector.

NOTE:

This antenna is not waterproof and should not be installed (external to device) where an IP68 rated installation is required.

Supplied in one (1) piece pack.

This is a standard stocked item.

XDIN-001
XDIN-001 Image

Site Sentinel® Industrial Logger.

DIN Rail Mounting Brackets supplied in a packet of two (2) pieces with four (4) mounting screws.

This is a standard stocked item.

XSCR-002
XSCR-002 Image

Site Sentinel® or Metermade® Industrial Logger.

Lid retaining screw – Replacement Pack.

Comprised of 12 pieces of M3 Countersunk black painted steel screws.

This is a standard stocked item.

 

XSCR-001
XSCR-001 Image

Site Sentinel® or Metermade® battery powered devices.

Lid retaining screw – Replacement Pack.

Comprised of 12 pieces of M4 Countersunk stainless steel screws.

This is a standard stocked item.

101 products«1 of 4»
101 products«1 of 4»
Antenna / Solar Masts
XMST-002 Image
XMST-002
OH&S Compliant tilt-over Antenna Mast Assembly. (No Solar Headframe – Used as Antenna Mast Only) Complete Kit comprised of: Mounting Base Mast Section Antenna Cap Stainless Stee... Read More
XMST-001 Image
XMST-001
OH&S Compliant tilt-over Solar / Antenna Mast Assembly. Complete Kit comprised of: Mounting Base Mast Section Solar/Antenna Head-frame Antenna Cap Stainless Steel Bolt Kit ... Read More
Antennas
XANT-006 Image
XANT-006
Log Periodic Directional Antenna Kit. Covers All Cellular Bands from 700 MHz. to 2100 MHz. Mast mounting hardware is supplied to suite pole diameters of up to 60mm. Supplied with 10 metres of low loss RG58 cable term... Read More
XANT-007 Image
XANT-007
Surface Mount “Cats Eye” style pavement reflector with embedded quad band 3G cellular antenna. Supplied with 3 metre cable length with SMA Male Connector and break-away patch cable to prevent damage. Nominal Gain: ... Read More
XANT-005 Image
XANT-005
Test Antenna. Vertical / Right Angle operation with SMA Male connector. Designed to be used as a bench testing antenna. NOTE: This antenna is not waterproof and should not be installe... Read More
XANT-004 Image
XANT-004
External Low-Profile Antenna. Vandal resistant design, single nut mount with spring washer and integrated o-ring. Supplied with 1.25m cable length and SMA Male connector. Nominal Gain: 2.0 dBi 698-960 MH... Read More
XANT-003 Image
XANT-003
External Dome Antenna. Vandal resistant design with foam sealing gasket.  Secured by screws or bolts (not supplied). Supplied with 1.25m cable length and SMA Male connector. Nominal Gain: 2 dBi 824-960M... Read More
XANT-001 Image
XANT-001
Internal High Gain Antenna. Supplied with 1.25m cable length and SMA Male connector. Designed for use inside the XENC-001 “Premium Pillar Assembly” to provide highest gain possible from internal antenna. Nominal ... Read More
XANT-002 Image
XANT-002
External High Gain Antenna. Supplied with 10 metre cable length (low-loss cable), factory terminated FME nipple connector and A-88 FME to SMA Male Adaptor. Single nut mounting (nut supplied). Designed for use on XMST... Read More
Batteries
XBAT-004 Image
XBAT-004
Battery Pack – 4 x AA Battery Holder. Designed for bench testing and programming of Site Sentinel and Metermade devices to prevent flattening non-rechargeable lithium primary battery packs before deployment. High quality ... Read More
XBAT-033 Image
XBAT-033
Site Sentinel® Extended Battery Pack – Non-Rechargeable. Complete Assembly. Supplied with three (3) internal XBAT-001 non-rechargeable battery packs, includes 2-pin to 2-pin interconnection cable (0.5m length) and stainl... Read More
XBAT-001 Image
XBAT-001
Standard Battery Pack – Non-Rechargeable. Primary lithium-thionyl chloride (Li-SOCl2), 2 x D Cell Saft LSH20. 7.2V nominal voltage, 13 Ah (93.6Wh) total capacity. Integral blocking and reverse protection diodes and... Read More
XBAT-002 Image
XBAT-002
Standard Battery Pack – Rechargeable. (for use in Solar or external DC power supply applications). Panasonic Lithium-Ion cells (4 x AA Cell) 7.4V Nominal Voltage, 6.7Ah (49.58Wh) total capacity. PLEA... Read More
XBAT-005 Image
XBAT-005
Standard Battery Pack – Non-Rechargeable. Primary lithium-thionyl chloride (Li-SOCl2), 1 x D Cell Saft LSH20. 3.6V nominal voltage, 13 Ah (46.8Wh) total capacity. Suits Site Sentinel H1-001-DA Integrated Rain Gauge... Read More
Data Comms Cables
XCAB-800-8.0 Image
XCAB-800-8.0
DC Power and Data Cable for MetPak Weather Station, terminated one end with stripped and tinned wires and loop wires and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger Modbus Comms Port. 8.0... Read More
XCAB-800-0.85 Image
XCAB-800-0.85
DC Power and Data Cable for MetPak Weather Station, terminated one end with stripped and tinned wires and loop wires and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logger Modbus Comms Port. 0.8... Read More
XCAB-700-2.0 Image
XCAB-700-2.0
DC Power Cable for ABB Aquamaster 3 Flow Meter (External Renewable Power connection), 2 metre length, terminated one end with ABB specific connector, other end with Site Sentinel® 2-Pin DC connector, used with XIO-202 Plug and Play DC j... Read More
XCOM-004 Image
XCOM-004
DC Power Cable for ABB Aquamaster 3 Flow Meter (External Renewable Power connection), 2 metre length, terminated one end with ABB specific connector, other end fitted 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-D... Read More
XCOM-003 Image
XCOM-003
RS485 Serial Comms cable for ABB Aquamaster 3 Flow Meter (Modbus connection), 3 metre length, terminated one end with ABB specific connector and other end with 4-Pin Switchcraft connector for connection to Site Sentinel® X1-002-DA Logge... Read More
XCOM-001-0.5 Image
XCOM-001-0.5
Metermade® RS485 Modbus Comms interface card (Suits installation only on Tyco I-300 Irriflow Irrigation Flow meter) with 0.5 metre cable tail
Factory Programming and Build Services
XBLD-001 Image
XBLD-001
Time Poor and don’t want assembly hassle ? Why not choose piece of mind and  have your equipment package factory built by 37South and shipped ready to deploy in the field. Site Sentinel® or Metermade® Pillar Cubicle ?... Read More
XFPG-001 Image
XFPG-001
Time Poor and don’t want programming hassle ? Why not choose piece of mind and  have your devices factory programmed by 37South and shipped ready to deploy in the field. Site Sentinel® or Metermade® device Factory Pro... Read More
Field Service Tools
XMAG-001 Image
XMAG-001
Magnetic Swipe / Lanyard. Used to “trigger” unsolicited communications session from battery powered Site Sentinel and Metermade devices. Supplied on handy lanyard. This is a standard stocked item.... Read More
XCAP-003 Image
XCAP-003
Site Sentinel® or Metermade® Battery Powered Logger. Standard IP68 Blank I/O Connector Cap. NOTE: I/O Connector caps MUST be installed on all unused I/O ports where an IP68 rated installati... Read More
XCAP-002 Image
XCAP-002
Site Sentinel® or Metermade® Battery Powered Logger. Standard Gold Plated SMA Male IP68 Blank Antenna Connector Cap.   Supplied in one (1) piece pack. This is a standard stocked item.
XCAP-001 Image
XCAP-001
Replacement Blank Antenna Cap. Suitable for XMST-001 / XMST-002. Galvanised Steel, Powder coated “Wilderness” Green. This is a standard stocked item.
XANT-009 Image
XANT-009
Site Sentinel® or Metermade® Battery Powered Logger. Standard “INTERNAL” right angle antenna with SMA male connector. NOTE: This antenna is not waterproof and should not be installed (e... Read More
XDIN-001 Image
XDIN-001
Site Sentinel® Industrial Logger. DIN Rail Mounting Brackets supplied in a packet of two (2) pieces with four (4) mounting screws. This is a standard stocked item.
XSCR-002 Image
XSCR-002
Site Sentinel® or Metermade® Industrial Logger. Lid retaining screw – Replacement Pack. Comprised of 12 pieces of M3 Countersunk black painted steel screws. This is a standard stocked item.  
XSCR-001 Image
XSCR-001
Site Sentinel® or Metermade® battery powered devices. Lid retaining screw – Replacement Pack. Comprised of 12 pieces of M4 Countersunk stainless steel screws. This is a standard stocked item.
101 products«1 of 4»

Share This:

FacebooktwitterpinterestlinkedinmailFacebooktwitterpinterestlinkedinmail